Nanostructured Anodic Oxide Films of Niobium: Features of Electrochemical Formation, Functional Properties and Applications (Review)
DOI:
https://doi.org/10.15330/pcss.17.2.160-169Keywords:
anodic oxide film, anodic oxidation, niobium, porous oxide coatingAbstract
The review summarizes data on the anodic behavior of niobium in aqueous solutions. Features of electrochemical formation nanostructured oxide coatings on niobium by anodic oxidation are systematized. The article deals with theoretical aspects formation of the porous anodic oxide layers. The influence of process parameters and the characteristics of the electrolyte on layer of niobium oxide were analyzed. The functional properties of porous coating on niobium are considered and promising areas of practical application identified.
References
[1] P. Schmuki, S. Virtanen, Electrochemistry at the Nanoscale, Nanostructure Science and Technology, 435, (2009).
[2] M.L. Dmitruk, T.R. Barlas, V.O. Serdjuk, Fіzika і hіmіja tverdogo tіla 11(1), 13 (2010).
[3] V.I. Vigdorovich, N.V. Sockaja, N.V. Shel' i dr., Kondensirovannye sredy i mezhfaznye granicy, 10(2), 85 (2008).
[4] A.V. Lukashin, Sozdanie funkcional'nyh nanokompozitov na osnove oksidnyh matric s uporjadochennoj poristoj strukturoj:avtoref. dis. … d-ra him. nauk, Moskva, (2009).
[5] A.A. Dronov, Issledovanie i razrabotka tehnologij sozdanija fotojelektrodov na osnove nanostrukturirovannogo oksida titana: avtoref. dis. … kand. tehn. nauk, Moskva, (2012).
[6] B.I. Bajrachnyj, L.V. Ljashok, I.A. Tokareva, Perspektivnye materialy, 2, 66 (2014).
[7] A.N. Morozov, Sintez i kataliticheskie svojstva nanostrukturirovannyh pokrytij dioksida titana: avtoref. dis. … kand. him. nauk, Moskva, (2014).
[8] P. Roy, S. Berger, P. Schmuki, Angew. Chem. Int. Ed., 50, 2904 (2011).
[9] A. Ghicov, P. Schmuki, Chem. Commun., 2791 (2009).
[10] G. Poinern, N. Ali, D. Fawcett, Materials, 4, 487 (2011).
[11] D. Regoninia, C.R. Bowena, A. Jaroenworaluckc, R. Stevensa, MaterialsScienceandEngineeringR, 74(12), 377 (2013).
[12] B.I. Bajrachnyj, F.K. Andrjushhenko, Jelektrohimija ventil'nyh metallov (Vishha shkola, Har'kov, 1985).
[13] E. Asselin, T.M. Ahmed, A. Alfantazi, Corrosion Science, 49, 694(2007).
[14] L.L. Odynec, Anodnye oksidnye plenki (Nauka, Leningrad, 1990).
[15] S.P. Eremenko, D.B. Sandulov, L.I. Kolomiec, O.N. Malinovskaja, Zhurnal prikladnoj spektroskopii, 35(1), 122(1981).
[16] L.L. Odynec, A.L. Pergament, G.B. Stefanovich, F.A. Chudnovskij, Fizika tverdogo tela, 37(7), 2215(1995).
[17] A.T. Vas'ko, S.K. Kovach, Jelektrohimija tugoplavkih metallov (Tehnіka, Kiev, 1983).
[18] G.V. Ionova, V. Pershina, E. Johnson et al., J. Phys. Chem., 96, 11096(1992).
[19] V.S. Bosov, M.I. Vinogradov, V.A. Nazuk i dr., Poverhnost', 2, 126(1983).
[20] G.V. Haldeev, V.K. Gogel', Uspehi himii, 56(7), 1057(1987).
[21] A.N. Kamkin, Zakonomernosti anodno-anionnoj aktivacii niobija: avtoref. dis. … kand. him. nauk, Moskva, (1981).
[22] G. Tul's'kij, L. Ljashok, І. Tokarєva, O. Borsuk, Fіziko-hіmіchna mehanіka materіalіv, 1(10), 280 (2014).
[23] H. Lu, R. Gautier, M.D. Donakowski et al., Inorganic Chemistry, 53, 537 (2014).
[24] B.I. Bajrachnyj, L.V. Ljashok, I.A. Tokareva, Gal'vanotehnika i obrabotka poverhnosti, 1, 34, (2014).
[25] L.L. Odynec, Fizika oksidnyh plenok (Petrozavod. gos. univ. im. Kuusinena, Petrozavodsk, 1981).
[26] A.D. Davydov, R.A. Mirzoev, B.N. Kabanov, Jelektrohimija, 19(11), 1415 (1983).
[27] I.A. Tokareva, B.I. Bajrachnyj, L.V. Ljashok, Vіsnik NTU «HPІ», 28, 143 (2014).
[28] І.A. Tokarєva, Elektrohіmіchnij sintez poristih oksidnih pokrittіv na nіobії: avtoref. dis. … kand. thn. nauk, Harkіv, (2015).
[29] A.F. Bogojavlenskij, Anodnaja zashhita metallov (Mashinostroenie, Moskva, 1964).
[30] A.F. Bogojavlenskij, Zhurnal prikladnoj himii, 45(3), 682 (1972).
[31] A.F. Bogojavlenskij, Izv. Vuzov. Him. i him. tehnologija, 14(5), 712 (1971).
[32] O. Jessensky, F. Müller, U.Gösele, Applied Physics Letters, 72, 1173 (1998).
[33] D.D. Makdonal'd, Jelektrohimija, 48(3), 259 (2012).
[34] I.F. Lin, C.Y. Chao, D.D. Macdonald, J. EIectrochem., 6, 1194, (1981).
[35] De-Sheng Kong, Langmuir, 26(7), 4880, (2010). [36] B. Tzvetkov, M. Bojinov, A. Girginov, J. SolidStateElectrochem., 13, 1215, (2009).
[37] Y. Oikawa, T. Minami, H. Mayama, K. Tsujii, ActaMaterialia, 57, 3941, (2009).
[38] J. Zhao, X. Wang, R. Xu, Electrochemical and Solid-State letters, 10(4), 31, (2007).
[39] S. Yang, H. Habazaki, T. Fujiietal., Electrochim. Acta, 56, 7446, (2011).
[40] K. Nagahara, M. Sakairi, H. Takahashietal., Electrochim. Acta, 52, 2134 (2007).
[41] A.E. Gridnev, Vestnik VGU, Serija: Fizika. Matematika, 1, 11, (2008).
[42] D. Fang, S. Chen, M. Jiang et al., Materials Science in Semiconductor Processing, 18, 105, (2014).
[43] N.K. Kim, J.E. Yoo, J. Park et al., Bull. Korean Chem. Soc., 33(8), 2675, (2012).
[44] I. Sieber, H. Hildebrand, A. Friedrich, P. Schmuki, Electrochemistry Communications, 7(1), 97, (2005).
[45] A.V. Atrashhenko, A.A. Krasilin, I.S. Kuchuk i dr., Nanosistemy: fizika, himija, matematika., 3(3), 31, (2012).
[46] A.N. Belov, A.A. Dronov, I.Ju. Orlov, Izvestija vuzov. Jelektronika., 75(1), 16, (2009).
[47] J. Choi, J.H. Lim, S.C. Leeetal., ElectrochimicaActa, 51, 5502, (2006).
[48] R. Kirchgeorg, W. Wei, K. Lee et al., Chemistry Open, 1, 21, (2012).
[49] J.E. Yoo, J. Park, G. Cha, Thin Solid Films, 531, 402, (2013).
[50] W. Wei, K. Lee, S. Shaw, P. Schmuki, Chem. Commun, 48, 4244, (2012).
[51] J.E. Yoo, J. Choi, Electrochimica Acta, 55, 5142, (2010).
[52] J.Z. Ou, R.A. Rani, M.H. Ham et al., Acsnano, 6(5), 4045, (2012).
[53] S. Cattarin, M. Musiani, B. Tribollet, J. Electrochem. Soc., 149(10), B457, (2002).
[54] S. Yang, H. Habazaki, T. Fujiietal., Electrochim. Acta, 56, 7446, (2011).
[55] S. Yang, Y. Aoki, H. Habazaki, Applied Surface Science, 257, 8190, (2011).
[56] L. Skatkov, L. Lyashok, V. Gomozov et al., Journal of Electrochemical Science and Engineering, 4(2), 75, (2014).
[57] Z. Wang, Y. Hu, W. Wang etal., International journal of hydrogen energy, 37, 4526, (2012).
[58] H. Gu, Z. Wang, Y. Hu, Sensors, 12, 5517, (2012).
[59] G. Korotcenkov, Materials Science and Engineering, 139, 1, (2007).
[60] T. Hyodo, J. Ohoka, Y. Shimizu, M. Egashira, Sensors and Actuators B, 117, 359, (2006).
[61] T. Ushikubo, Catalysis Today, 57, 331, (2000).
[62] M. Segers, T. Peeters, Niobium: Chemical properties, applications and environmental effects (Nova Science Publ., New York, 2013).
[63] M. Ziolek, Catalysis Today, 78, 47, (2003).
[64] Y. Zhao, X. Zhou, L. Ye, S. Tsang, Nano Reviews, 3, 17631, (2012).
[65] Y. Ansanay, P. Kolar, R.R. Sharma-Shivappa, J.J. Cheng, Industrial Crops and Products, 52, 790, (2014).
[66] K. Tanabe, Catal. Today, 8(1), 1, (1990).
[67] F.A. Chernyshkova, Uspehi himii, 62(8), 788, (1993).
[68] E. Eisenbarth, D. Velten, M. Mulleretal., JournalofBiomedicalMaterialsResearch, 79A, 166, (2006).
[69] S.A. Pauline, N. Rajendran, Applied Surface Science, 290, 448, (2014).
[70] X.J. Wang, Y.C. Li, J.G. Lin etal., Acta Biomaterialia, 4, 1530, (2008).
[71] S.L. Starіkova, Vikoristannja tantalu і nіobіju z modifіkovanoju poverhneju dlja dental'noї іmplantacії: avtoref. dis. … kand. med. nauk, Odesa, (2003).
[72] A.C. Mackey, L.R. Karlinsey, G.T.M. Chuetal., MaterialsSciencesandApplications, 3, 301, (2012).
[73] D.D. Yao, R.A. Rani, A.P. O’Mullane et al., J. Phys. Chem. C, 118, 476, (2014).
[2] M.L. Dmitruk, T.R. Barlas, V.O. Serdjuk, Fіzika і hіmіja tverdogo tіla 11(1), 13 (2010).
[3] V.I. Vigdorovich, N.V. Sockaja, N.V. Shel' i dr., Kondensirovannye sredy i mezhfaznye granicy, 10(2), 85 (2008).
[4] A.V. Lukashin, Sozdanie funkcional'nyh nanokompozitov na osnove oksidnyh matric s uporjadochennoj poristoj strukturoj:avtoref. dis. … d-ra him. nauk, Moskva, (2009).
[5] A.A. Dronov, Issledovanie i razrabotka tehnologij sozdanija fotojelektrodov na osnove nanostrukturirovannogo oksida titana: avtoref. dis. … kand. tehn. nauk, Moskva, (2012).
[6] B.I. Bajrachnyj, L.V. Ljashok, I.A. Tokareva, Perspektivnye materialy, 2, 66 (2014).
[7] A.N. Morozov, Sintez i kataliticheskie svojstva nanostrukturirovannyh pokrytij dioksida titana: avtoref. dis. … kand. him. nauk, Moskva, (2014).
[8] P. Roy, S. Berger, P. Schmuki, Angew. Chem. Int. Ed., 50, 2904 (2011).
[9] A. Ghicov, P. Schmuki, Chem. Commun., 2791 (2009).
[10] G. Poinern, N. Ali, D. Fawcett, Materials, 4, 487 (2011).
[11] D. Regoninia, C.R. Bowena, A. Jaroenworaluckc, R. Stevensa, MaterialsScienceandEngineeringR, 74(12), 377 (2013).
[12] B.I. Bajrachnyj, F.K. Andrjushhenko, Jelektrohimija ventil'nyh metallov (Vishha shkola, Har'kov, 1985).
[13] E. Asselin, T.M. Ahmed, A. Alfantazi, Corrosion Science, 49, 694(2007).
[14] L.L. Odynec, Anodnye oksidnye plenki (Nauka, Leningrad, 1990).
[15] S.P. Eremenko, D.B. Sandulov, L.I. Kolomiec, O.N. Malinovskaja, Zhurnal prikladnoj spektroskopii, 35(1), 122(1981).
[16] L.L. Odynec, A.L. Pergament, G.B. Stefanovich, F.A. Chudnovskij, Fizika tverdogo tela, 37(7), 2215(1995).
[17] A.T. Vas'ko, S.K. Kovach, Jelektrohimija tugoplavkih metallov (Tehnіka, Kiev, 1983).
[18] G.V. Ionova, V. Pershina, E. Johnson et al., J. Phys. Chem., 96, 11096(1992).
[19] V.S. Bosov, M.I. Vinogradov, V.A. Nazuk i dr., Poverhnost', 2, 126(1983).
[20] G.V. Haldeev, V.K. Gogel', Uspehi himii, 56(7), 1057(1987).
[21] A.N. Kamkin, Zakonomernosti anodno-anionnoj aktivacii niobija: avtoref. dis. … kand. him. nauk, Moskva, (1981).
[22] G. Tul's'kij, L. Ljashok, І. Tokarєva, O. Borsuk, Fіziko-hіmіchna mehanіka materіalіv, 1(10), 280 (2014).
[23] H. Lu, R. Gautier, M.D. Donakowski et al., Inorganic Chemistry, 53, 537 (2014).
[24] B.I. Bajrachnyj, L.V. Ljashok, I.A. Tokareva, Gal'vanotehnika i obrabotka poverhnosti, 1, 34, (2014).
[25] L.L. Odynec, Fizika oksidnyh plenok (Petrozavod. gos. univ. im. Kuusinena, Petrozavodsk, 1981).
[26] A.D. Davydov, R.A. Mirzoev, B.N. Kabanov, Jelektrohimija, 19(11), 1415 (1983).
[27] I.A. Tokareva, B.I. Bajrachnyj, L.V. Ljashok, Vіsnik NTU «HPІ», 28, 143 (2014).
[28] І.A. Tokarєva, Elektrohіmіchnij sintez poristih oksidnih pokrittіv na nіobії: avtoref. dis. … kand. thn. nauk, Harkіv, (2015).
[29] A.F. Bogojavlenskij, Anodnaja zashhita metallov (Mashinostroenie, Moskva, 1964).
[30] A.F. Bogojavlenskij, Zhurnal prikladnoj himii, 45(3), 682 (1972).
[31] A.F. Bogojavlenskij, Izv. Vuzov. Him. i him. tehnologija, 14(5), 712 (1971).
[32] O. Jessensky, F. Müller, U.Gösele, Applied Physics Letters, 72, 1173 (1998).
[33] D.D. Makdonal'd, Jelektrohimija, 48(3), 259 (2012).
[34] I.F. Lin, C.Y. Chao, D.D. Macdonald, J. EIectrochem., 6, 1194, (1981).
[35] De-Sheng Kong, Langmuir, 26(7), 4880, (2010). [36] B. Tzvetkov, M. Bojinov, A. Girginov, J. SolidStateElectrochem., 13, 1215, (2009).
[37] Y. Oikawa, T. Minami, H. Mayama, K. Tsujii, ActaMaterialia, 57, 3941, (2009).
[38] J. Zhao, X. Wang, R. Xu, Electrochemical and Solid-State letters, 10(4), 31, (2007).
[39] S. Yang, H. Habazaki, T. Fujiietal., Electrochim. Acta, 56, 7446, (2011).
[40] K. Nagahara, M. Sakairi, H. Takahashietal., Electrochim. Acta, 52, 2134 (2007).
[41] A.E. Gridnev, Vestnik VGU, Serija: Fizika. Matematika, 1, 11, (2008).
[42] D. Fang, S. Chen, M. Jiang et al., Materials Science in Semiconductor Processing, 18, 105, (2014).
[43] N.K. Kim, J.E. Yoo, J. Park et al., Bull. Korean Chem. Soc., 33(8), 2675, (2012).
[44] I. Sieber, H. Hildebrand, A. Friedrich, P. Schmuki, Electrochemistry Communications, 7(1), 97, (2005).
[45] A.V. Atrashhenko, A.A. Krasilin, I.S. Kuchuk i dr., Nanosistemy: fizika, himija, matematika., 3(3), 31, (2012).
[46] A.N. Belov, A.A. Dronov, I.Ju. Orlov, Izvestija vuzov. Jelektronika., 75(1), 16, (2009).
[47] J. Choi, J.H. Lim, S.C. Leeetal., ElectrochimicaActa, 51, 5502, (2006).
[48] R. Kirchgeorg, W. Wei, K. Lee et al., Chemistry Open, 1, 21, (2012).
[49] J.E. Yoo, J. Park, G. Cha, Thin Solid Films, 531, 402, (2013).
[50] W. Wei, K. Lee, S. Shaw, P. Schmuki, Chem. Commun, 48, 4244, (2012).
[51] J.E. Yoo, J. Choi, Electrochimica Acta, 55, 5142, (2010).
[52] J.Z. Ou, R.A. Rani, M.H. Ham et al., Acsnano, 6(5), 4045, (2012).
[53] S. Cattarin, M. Musiani, B. Tribollet, J. Electrochem. Soc., 149(10), B457, (2002).
[54] S. Yang, H. Habazaki, T. Fujiietal., Electrochim. Acta, 56, 7446, (2011).
[55] S. Yang, Y. Aoki, H. Habazaki, Applied Surface Science, 257, 8190, (2011).
[56] L. Skatkov, L. Lyashok, V. Gomozov et al., Journal of Electrochemical Science and Engineering, 4(2), 75, (2014).
[57] Z. Wang, Y. Hu, W. Wang etal., International journal of hydrogen energy, 37, 4526, (2012).
[58] H. Gu, Z. Wang, Y. Hu, Sensors, 12, 5517, (2012).
[59] G. Korotcenkov, Materials Science and Engineering, 139, 1, (2007).
[60] T. Hyodo, J. Ohoka, Y. Shimizu, M. Egashira, Sensors and Actuators B, 117, 359, (2006).
[61] T. Ushikubo, Catalysis Today, 57, 331, (2000).
[62] M. Segers, T. Peeters, Niobium: Chemical properties, applications and environmental effects (Nova Science Publ., New York, 2013).
[63] M. Ziolek, Catalysis Today, 78, 47, (2003).
[64] Y. Zhao, X. Zhou, L. Ye, S. Tsang, Nano Reviews, 3, 17631, (2012).
[65] Y. Ansanay, P. Kolar, R.R. Sharma-Shivappa, J.J. Cheng, Industrial Crops and Products, 52, 790, (2014).
[66] K. Tanabe, Catal. Today, 8(1), 1, (1990).
[67] F.A. Chernyshkova, Uspehi himii, 62(8), 788, (1993).
[68] E. Eisenbarth, D. Velten, M. Mulleretal., JournalofBiomedicalMaterialsResearch, 79A, 166, (2006).
[69] S.A. Pauline, N. Rajendran, Applied Surface Science, 290, 448, (2014).
[70] X.J. Wang, Y.C. Li, J.G. Lin etal., Acta Biomaterialia, 4, 1530, (2008).
[71] S.L. Starіkova, Vikoristannja tantalu і nіobіju z modifіkovanoju poverhneju dlja dental'noї іmplantacії: avtoref. dis. … kand. med. nauk, Odesa, (2003).
[72] A.C. Mackey, L.R. Karlinsey, G.T.M. Chuetal., MaterialsSciencesandApplications, 3, 301, (2012).
[73] D.D. Yao, R.A. Rani, A.P. O’Mullane et al., J. Phys. Chem. C, 118, 476, (2014).
Downloads
Published
2016-06-15
How to Cite
Вayrachniy B. I., & Tokareva, I. A. (2016). Nanostructured Anodic Oxide Films of Niobium: Features of Electrochemical Formation, Functional Properties and Applications (Review). Physics and Chemistry of Solid State, 17(2), 160–169. https://doi.org/10.15330/pcss.17.2.160-169
Issue
Section
Scientific articles
