Infiltration Kinetics of Cr3C2 by Manganese Cupronickel in the Process of Obtaining Cermets

Authors

  • T.A. Shihab Ivano-Frankivsk National Technical University of Oil and Gas
  • Yu.I. Paraiko Ivano-Frankivsk National Technical University of Oil and Gas
  • P.M. Prysyazhnyuk Ivano-Frankivsk National Technical University of Oil and Gas
  • L. Ya. Ropyak Ivano-Frankivsk National Technical University of Oil and Gas
  • V.V. Turluch Ivano-Frankivsk National Technical University of Oil and Gas
  • Ya.A. Kryl’ Ivano-Frankivsk National Technical University of Oil and Gas

DOI:

https://doi.org/10.15330/pcss.16.2.408-412

Keywords:

chromium carbide, manganese cupronickel, cermet, infiltration, Lambert W-function

Abstract

A theoretical model of infiltration kinetics based on the Darcy's law which was evaluated by W − Lambert function has been established for Cu-Ni-Mn alloy (grade MNMts 60-20-20) during melt infiltration into Cr3C2  porous skeletons with different morphology. It is shown, that theoretical calculations are in good correlation with experimental data obtained by pressureless infiltration of carbide preforms with open porosity 20-40 vol. % at 1200 °C. Calculations shows that infiltration height dependence on the average size of carbide particles is described by curves with a maximum which corresponds to~ 60 μm for specified system with carbide skeleton porosity of 40 vol. %.

References

[1] L. I. Tuchinskij, Kompozicionnye materialy, poluchaemye metodom propitki (Metallurgija, Moskva, 1986).
[2] A. M. Lorenz, E.M. Sachs Solid FreeForm Fabrication Symposium (The University of Texas at Austin, Austin, 2001).
[3] E. Scheidegger, The physics of flow through porous media (3rd ed.)(UniversityofTorontoPress, Toronto, 1974).
[4] P. M. Prisjazhnjuk, Ja. A. Kril', Materialy i pokrytija v jekstremal'nyh uslovijah: issledovanija, primenenie, jekologicheski chistye tehnologii proizvodstva i utilizacii izdelij (NAN Ukrainy, Bol'shaja Jalta, 2010).
[5] Yu. D. Myshko, A. V. Klibus, M. N. Gapchenko, N. Ya. Ishchuk. Powder Metall. Met. Ceram.13(9), 731 (1974).
[6] JMatPro practical software for materials properties [Elektronnij resurs]. Rezhimdostupu: http://www.sentesoftware.co.uk/jmatpro.aspx − Nazva z titul. ekranu. – Mova. ang.
[7] A. E. Dubinov, I. D. Dubinova, S. K. Sajkov, W-funkcija Lamberta i ee primenenie v matematicheskih zadachah fiziki (FGUP "RFJaC-VNIIJeF, Sarov, 2006).
[8] Maple 2015 - Technical Computing Software for Engineers [Elektronnijresurs]. Rezhim dostupu: http://www.maplesoft.com/products/maple/ − Nazva z titul. ekranu. – Mova. ang.
[9] Ju. І. Parajko Fіzika і hіmіja tverdogo tіla8(1), 182 (2007).
[10] L. Ja. Rop’jak, І. P. Shac'kij, M. V. Makovіjchuk, Ocіnka mіcnostі dvosharovogo pokrittja pіd lokal'nim navantazhennjam (Mіzhvuzіvs'kij zbіrnik «Naukovі notatki», Luc'k, Vip. 50. 2005.).

Published

2015-06-15

How to Cite

Shihab, T., Paraiko, Y., Prysyazhnyuk, P., Ropyak, L. Y., Turluch, V. ., & Kryl’, Y. (2015). Infiltration Kinetics of Cr3C2 by Manganese Cupronickel in the Process of Obtaining Cermets. Physics and Chemistry of Solid State, 16(2), 408–412. https://doi.org/10.15330/pcss.16.2.408-412

Issue

Section

Scientific articles