Synthesis of Nanosized Powders with the Structure of Perovskite
DOI:
https://doi.org/10.15330/pcss.16.1.181-184Keywords:
sol-gel technology, lanthanum ferrite, nanoscale powders,, agglomerates, thermal reactionAbstract
The aim of this work was to create and study of ferrite lanthanum powders, using sol-gel technology with participation of auto-combustion. After the sintering at a temperature of 1123 K only one phase, which corresponded to the solid solution LaFeO3, was obtained. It was found that obtained powders were agglomerated, and the size of the crystallites were less than 50 nm. It was researched the processes of phase transitions and chemical reactions, which the heating of synthesized material in the temperature range 298 - 1173 K accompany. It was shown that the process of forming of LaFeO3 phase occurs by heating the powder at a temperature of 1043 K.
References
Shen Hui, XU Jiayue, W.U. Anhua, Journal of Rare Earths 28(3), 416 (2010).
S.M. Khetre, H.V. Jadhav, S.R. Bamane, Rasayan J. Chem. 2(1), 174 (2009).
F. Deganello, G. Marci, G. Deganello, Journal of the European Ceramic Society 29, 439 (2009).
D. Munoz, N.M. Harrison, F. Illas, Physical Review B 69, 085115 (2004).
Z.H. Chi, C.J. Xiao, S.M. Feng, F.Y. Li, C.Q. Jina, Journal of Applied Physics 98, 103519 (2005).
Jinxian Wang, Xiangting Dong, Zhen Qu, Guixia Liu, Wensheng Yu, Modern Applied Science 3(9), 65 (2009).
J. Chandradass, Ki Hyeon Kim, Materials Chemistry and Physics 122(2), 329 (2010).
M. Sivakumar, A. Gedanken, W. Zhong, Y.H. Jiang, Y.W. Du, I. Brukental, D. Bhattacharya, Y. Yeshurun, I. Nowik, Journal of Materials Chemistry 14, 764 (2004).
M.J. Kakihana, Sol-Gel Sci. Technol. 6(1), 7 (1996).
Sumio Sakka. Sol–Gel Science and Technology. Processing,Characterization and Applications (Hiromitsu Kozuka Kansai University Suita, Osaka, 2012).
A. Kopaev, V. Bushkova, B. Ostafiychuk. Sol-Gel Synthese und Eigenschaften der weichmagnetischen Nanoferrite und Verbundwerkstoffen. Physik und Technologie der Nanoferrite mit dem Bariumtitanat (Lap Lambert Academic Publishing, Saarbrücken, 2013).
Yeon Hwang, Dae Sik Kang, Mi Hye Park, Journal of Ceramic Processing Research 11(3), 397 (2010).
S. Thirumalairajan, K. Girija, I. Ganesh, D. Mangalara, C. Viswanathan, A. Balamurugan, N. Ponpandian, Chemical Engineering Journal 209, 420 (2012).
Q. Zhang, F. Saito, Journal Materials Science 36, 2287 (2001).
B. Bakiz, F. Guinneton, M. Arab, A. Benlhachemi, S. Villain, P. Satre, J.R. Gavarri, Advances in Materials Science and Engineering 201, 360597 (2010).