The Lithium Power Sources Based on Porous Carbon Material
DOI:
https://doi.org/10.15330/pcss.16.1.217-220Keywords:
porous carbon material, lithium power sources, galvanostatic charge/discharge, specific capacity, Coulomb efficiencyAbstract
The paper describes the use of porous carbon material (PCM), obtained from plant raw materials as anode of lithium power source (LPS). It is established that the electrochemical parameters of LPS at current density of C/20 are stable over long cycling (over 90 charge/discharge cycles) – discharge capacity remained at 150 mA∙h/g, and Coulomb efficiency exceeds 95%.
References
Z. Ogumi, M. Inaba, Advances in lithium-ion batteries (Plenum publishers, Kluwer Academic, 2002).
M. Noel, V. Suryanarayanan, J. Power Sources, 111 (2), 193 (2002).
P. Novak, D. Goers, M.E. Spahr, Carbons for electrochemical energy storage and conversion systems (Advanced materials and technologies series, CRC Press Taylor & Francis Group, 2010).
P. Novák, F. Joho, M. Lanz, J. Power Sources, 97-98, 39 (2001).
N.І. Nagіrna, V.І. Mandzjuk, R.P. Lіsovs'kij, Ju.O. Kulik, Physics and Chemistry of Solid State 14(4), 749 (2013).
V.І. Mandzjuk, N.І. Nagіrna, R.P. Lіsovs'kij, Zhurnal nano-ta elektronnoj fіziki, 6(1), 01017-1 (2014).
V.І. Mandzjuk, І.P. Jaremіj, Physics and Chemistry of Solid State 15(3), 490 (2014).
V.І. Mandzjuk, B.І. Rachіj, R.P. Lіsovs'kij, R.І. Merena, Physics and Chemistry of Solid State 10(3), 647 (2009).
V.I. Mandzyuk, R.P. Lisovskyy, N.I. Nagirna, Nanoscience and Nanotechnology Research 1(2), 23 (2013).
V.І. Mandzjuk, R.P. Lіsovs'kij, N.І. Nagіrna, B.І. Rachіj, Fіzichna іnzhenerіja poverhnі 11(1), 112 (2013).
Downloads
Published
How to Cite
Issue
Section
