Проблеми вибору мастил для етиленових компресорів високого тиску. 4. Дослідження антифрикційних властивостей нафтенових і полігліколевих мастил під час високих навантажень твердих пар тертя
DOI:
https://doi.org/10.15330/pcss.19.1.79-94Ключові слова:
мастильні матеріали, етиленові компресори, чотирикульова машина тертя, властивості, бронза, графелон-20, мінеральні, нафтенові, полігліколеві та полібутенові оливиАнотація
Досліджено антифрикційні властивості нафтових та полігліколевих олив при невеликих навантаженнях на пари бронзи: вольфрам-карбідного сплаву ВК-6 (ВК-11) – графелон-20-ВК-6 (ВК- 11) і великих навантаженнях на пари вальникових високохромованих сталей ШХ-15 – ШХ-15. Нові кореляції в'язкотермічних та антифрикційних властивостей різних полігліколевих олив дозволяють створити ефективні композиції на їх основі. Виявлено залежність величини навантаження від молекулярної маси різних полігліколів, плями зносу від осьового навантаження та граничного навантаження від концентрації добавок в нафтенових та мінеральних оливах. Середньоквадратичне відносне відхилення діаметра плями зносу від діаметра за Герцом дає узагальнюючу оцінку протизносних властивостей мастильних масел.
Посилання
[1] A. M. Zavoyko, I. I. Novikov, H. A Sirenko and etc., Chemical and petroleum engineering, (1), 19 (1984) (in Russian).
[2] A. M. Zavoyko, I. I. Novikov, H. A. Sirenko, A. H. Platonov, On the selection of oils for the production of high-density polyethylene (NiiTechim, Moskva, 1987) (in Russian).
[3] H. A. Sirenko, R. V. Hrinevych, I. I. Novikov, Thes. of the Rep. of the all-union Scient. and Techn. Confer. "Tribonica and antifriction material science" (NPY, Novochekassk, 1980), p. 156. (in Russian).
[4] H. O. Sirenko, Science Zb. "Bulletin of the All-Ukrainian scient. and prof. Assoc. of M. Mikhnovsky, (9),1 (1998) (in Ukrainian).
[5] O. Havryshkiv, O. Zavoyko, Herald of Vasyl Stefanyk Precarpathian National University. Series Chemistry, (III), 142 (2003) (in Ukrainian).
[6] O. Havryshkiv, Thes. of the fourth regionally conference of young scientists and students for the actually questions of chemistry (Dnipropetrovsk, 27-31 may 2002), p.118 (in Ukrainian).
[7] O. Havryshkiv, Thes. of the generalized scientific conference of Vasyl Stefanyk Precarpathian National University for 2002 year (V. Stefanyk Precarp. Nat. University. Ivano-Frankivsk, 2003 ), p. 27 (in Ukrainian).
[8] O. V. Kuzyshyn, Thes. of the first internat. Scient. and Techn. Confer. of students and postgraduated students (Dnipropetrovsk, 26-28 may 2003), p.116 (in Ukrainian).
[9] I. I. Novikov, V. P. Zakharenko, B. S. Lando. Non-lubricated piston seals in compressors (Mechanical Engineering, Lviv, 1981) (in Russian).
[10] A. A. Tarzimanov, A. V. Maryashev. Proceedings of Kazan Chemical Technologist Institute (90-73). (State registration No. 76036195) (Kazan, 1976), p. 3 (in Russian).
[11] I. R. Krichevsky. Phase equilibrium in solutions at high pressures (Goskhimizdat, Moscow, 1952) (in Russian).
[12] T. P. Zhuze Compressed gases as solvents (Nauka, Moscow, 1974) (in Russian).
[13] R. A. Shaghikhmetov Investigation of the viscosity, density of oils and the effect of dissolved gas on the viscosity at pressures up to 100-200 MPa: Abstract. Cand. dis. (Kazan, 1981) (in Russian).
[14] H. A. Sirenko Machine building and metal working (20), 44, (1977) (in Russian).
[15] H. A. Sirenko, V. P. Svidersky, V. D. Gerasimov, V. Z. Nikonov, Antifriction heat-resistant polymers (Tehnika, Kyiv, 1978) (in Russian).
[16] H. A. Sirenko, Antifriction carboplastics (Tehnika, Kyiv, 1985) (in Russian).
[17] H. O. Sirenko, Creation of antifriction composite materials on the basis of promoters of thermoforming polymers and carbon fibers: Dis. doc. Tech. Sciences: 05:16:06 (In-t Probl. of Mat. Science of the NASU, 1997) (in Ukrainian).
[18] Polybutene – Polyvis // Bulletin «Cosden Petroleum Corporation». – Translation No. P-121, (VNIINEFTEKHIM, Lviv, 1964), p.3 (in Russian).
[19] L. M. Rogacheva, A. V. Nemkov Development of technology for the production of additives based on petroleum raw materials and active elements. Studying the properties of copolymers of 2000-3500 molecular weight (GOSNIYNP, Kuybyshev, 1961) (in Russian).
[20] H. A. Sirenko, I. I. Novikov, V. P. Zakharenko, A. M. Zavoyko and etc., Grease for high-pressure ethylene compressors: Pat. 1063105 USSR, S 10 M1/28 / - No 3263977; Declaring. 23.03.81, (47), (1983). (in Russian).
[21] R. M. Matviyevsky Temperature method for estimating the limitability of machine oils (AN SSSR,Moscow, 1956) (in Russian).
[22] G. V. Vinogradov, J. Y. Podolsky, M. D. Bezborodko Use of machines with point contact of friction bodies for evaluation of wear of metals, antiwear and antifriction properties of lubricants // Methods of wear test. – (Moscow: Academy of Sciences of the USSR, 1962), p.3 (in Russian).
[23] G. A. Sirenko, A. C. Smirnov. Questions of the theory of friction, wear and lubrication (Novocherk. Polytechnic Institute, Novocherkassk, 1969) (215) (38) (in Russian).
[24] H. O. Sirenko, О. V. Kuzyshyn, F. V. Zavoiko. Problems of selection of lubricants for ethylene highpressure compressors. 1.Statement of a question of selection of lubricants. Problem of Tribology 4, 149 (2003).
[25] R. V. Grinevich, V. V. Tsasyuk, A. S. Smirnov. Application of synthetic materials (Kartya Moldovennyaske, Chisinau: 1975), p. 33 (in Russian).
[26] H. O. Sirenko, I. V. Sulyma, N. V. Shmaltser. Problems of Selection of Lubricants for Ethylene HighPressure Compressors. 3. Investigation of Viscous – and – Thermal Properties of Lubricants. Physics and Chemistry of Solid State, 18(3) (2017), p. 365.
[27] H. O. Sirenko, M. I. Martynyuk, V. P. Svidersky, I. V. Sulyma and ect. Problems of Selection of Lubricants for Ethylene High-Pressure Compressors. 5. Compatibility of oils with Polyethylene. Physics and Chemistry of Solid State, 18(4) (2017), p. 460.
[2] A. M. Zavoyko, I. I. Novikov, H. A. Sirenko, A. H. Platonov, On the selection of oils for the production of high-density polyethylene (NiiTechim, Moskva, 1987) (in Russian).
[3] H. A. Sirenko, R. V. Hrinevych, I. I. Novikov, Thes. of the Rep. of the all-union Scient. and Techn. Confer. "Tribonica and antifriction material science" (NPY, Novochekassk, 1980), p. 156. (in Russian).
[4] H. O. Sirenko, Science Zb. "Bulletin of the All-Ukrainian scient. and prof. Assoc. of M. Mikhnovsky, (9),1 (1998) (in Ukrainian).
[5] O. Havryshkiv, O. Zavoyko, Herald of Vasyl Stefanyk Precarpathian National University. Series Chemistry, (III), 142 (2003) (in Ukrainian).
[6] O. Havryshkiv, Thes. of the fourth regionally conference of young scientists and students for the actually questions of chemistry (Dnipropetrovsk, 27-31 may 2002), p.118 (in Ukrainian).
[7] O. Havryshkiv, Thes. of the generalized scientific conference of Vasyl Stefanyk Precarpathian National University for 2002 year (V. Stefanyk Precarp. Nat. University. Ivano-Frankivsk, 2003 ), p. 27 (in Ukrainian).
[8] O. V. Kuzyshyn, Thes. of the first internat. Scient. and Techn. Confer. of students and postgraduated students (Dnipropetrovsk, 26-28 may 2003), p.116 (in Ukrainian).
[9] I. I. Novikov, V. P. Zakharenko, B. S. Lando. Non-lubricated piston seals in compressors (Mechanical Engineering, Lviv, 1981) (in Russian).
[10] A. A. Tarzimanov, A. V. Maryashev. Proceedings of Kazan Chemical Technologist Institute (90-73). (State registration No. 76036195) (Kazan, 1976), p. 3 (in Russian).
[11] I. R. Krichevsky. Phase equilibrium in solutions at high pressures (Goskhimizdat, Moscow, 1952) (in Russian).
[12] T. P. Zhuze Compressed gases as solvents (Nauka, Moscow, 1974) (in Russian).
[13] R. A. Shaghikhmetov Investigation of the viscosity, density of oils and the effect of dissolved gas on the viscosity at pressures up to 100-200 MPa: Abstract. Cand. dis. (Kazan, 1981) (in Russian).
[14] H. A. Sirenko Machine building and metal working (20), 44, (1977) (in Russian).
[15] H. A. Sirenko, V. P. Svidersky, V. D. Gerasimov, V. Z. Nikonov, Antifriction heat-resistant polymers (Tehnika, Kyiv, 1978) (in Russian).
[16] H. A. Sirenko, Antifriction carboplastics (Tehnika, Kyiv, 1985) (in Russian).
[17] H. O. Sirenko, Creation of antifriction composite materials on the basis of promoters of thermoforming polymers and carbon fibers: Dis. doc. Tech. Sciences: 05:16:06 (In-t Probl. of Mat. Science of the NASU, 1997) (in Ukrainian).
[18] Polybutene – Polyvis // Bulletin «Cosden Petroleum Corporation». – Translation No. P-121, (VNIINEFTEKHIM, Lviv, 1964), p.3 (in Russian).
[19] L. M. Rogacheva, A. V. Nemkov Development of technology for the production of additives based on petroleum raw materials and active elements. Studying the properties of copolymers of 2000-3500 molecular weight (GOSNIYNP, Kuybyshev, 1961) (in Russian).
[20] H. A. Sirenko, I. I. Novikov, V. P. Zakharenko, A. M. Zavoyko and etc., Grease for high-pressure ethylene compressors: Pat. 1063105 USSR, S 10 M1/28 / - No 3263977; Declaring. 23.03.81, (47), (1983). (in Russian).
[21] R. M. Matviyevsky Temperature method for estimating the limitability of machine oils (AN SSSR,Moscow, 1956) (in Russian).
[22] G. V. Vinogradov, J. Y. Podolsky, M. D. Bezborodko Use of machines with point contact of friction bodies for evaluation of wear of metals, antiwear and antifriction properties of lubricants // Methods of wear test. – (Moscow: Academy of Sciences of the USSR, 1962), p.3 (in Russian).
[23] G. A. Sirenko, A. C. Smirnov. Questions of the theory of friction, wear and lubrication (Novocherk. Polytechnic Institute, Novocherkassk, 1969) (215) (38) (in Russian).
[24] H. O. Sirenko, О. V. Kuzyshyn, F. V. Zavoiko. Problems of selection of lubricants for ethylene highpressure compressors. 1.Statement of a question of selection of lubricants. Problem of Tribology 4, 149 (2003).
[25] R. V. Grinevich, V. V. Tsasyuk, A. S. Smirnov. Application of synthetic materials (Kartya Moldovennyaske, Chisinau: 1975), p. 33 (in Russian).
[26] H. O. Sirenko, I. V. Sulyma, N. V. Shmaltser. Problems of Selection of Lubricants for Ethylene HighPressure Compressors. 3. Investigation of Viscous – and – Thermal Properties of Lubricants. Physics and Chemistry of Solid State, 18(3) (2017), p. 365.
[27] H. O. Sirenko, M. I. Martynyuk, V. P. Svidersky, I. V. Sulyma and ect. Problems of Selection of Lubricants for Ethylene High-Pressure Compressors. 5. Compatibility of oils with Polyethylene. Physics and Chemistry of Solid State, 18(4) (2017), p. 460.
##submission.downloads##
Опубліковано
2018-03-15
Як цитувати
Сіренко, Г., Сулима I., Свідерський, В. П., Кузишин, О., & Шмальцер, Н. (2018). Проблеми вибору мастил для етиленових компресорів високого тиску. 4. Дослідження антифрикційних властивостей нафтенових і полігліколевих мастил під час високих навантажень твердих пар тертя. Фізика і хімія твердого тіла, 19(1), 79–94. https://doi.org/10.15330/pcss.19.1.79-94
Номер
Розділ
Огляд
